Self-propelled and time-saving, vacuums and washes your sealed hard floors in one smart step for an optimal clean in less time. Cordless, lightweight, and easy to use, extends runtime up to 35 min with intelligently optimized suction and battery power. 5-in-1 self-cleaning system keeps your hands clean, your system fresh, and your home odor-free. All-in-one LED display, built-in app connectivity, and helpful voice assistant monitors cleaning performance for the ultimate hard floor cleaning experience.
Please note that the machine must use the Tineco solution to ensure long-term use. The use of our solution will cause corrosion and damage to the machine. Clean water tank capacity: 600ml 3. Sewage tank capacity: 500ml 4. Use time: 25 minutes for low-grade (standard mode) and 20 minutes for high-grade (strong mode) when fully charged 5.
Charging time: 3-4 hours 6. The brushless motor has strong suction, single welt, and the water return rate is greater than 90% (for example: 450ML of sewage comes in when 500ML of clean water goes out), and the roller brush is blocked 7. Self-cleaning mode: After use, please put the machine back to the bottom plate in time. Press and hold the power button for 3 seconds to activate the self-cleaning function.
When you're done, make sure to clean the dirty water tank in a timely manner to avoid any odors. Before using the self-cleaning function, check if there is enough water in the fresh water tank. Product packaging weight: 6.8KG 9. Brushless floor scrubber1 Brush1 Brush barrel1 Backing plate1 Charger1 Instruction manual 1. Frequently Asked Questions and Answers:(Q/A). Before entrusting the repair department with the repair, please check the following points. Roller brush entangled with hair or foreign objects. Clean the dirty water tank. Roller brush, roller brush cover, or dirty water tank not properly installed.Brush inlet or pipes blocked. Clear the obstructions in the inlet or pipes. Sponge filter above the float dirty.
Clean the sponge filter before using again. Dirty water tank filter clogged or not installed. Clean or install the sponge filter before using again. Clear the obstructions in the inlet.Dirty water tank filled with wastewater. Empty the dirty water tank before use. Roller brush not spraying water. Clean water tank not installed properly. Pre-filter not dried after cleaning.
Dry the pre-filter before using it again. Water leaking from the bottom of the roller brush.
Dirty water tank or dirty water tank sponge filter not installed. Install the dirty water tank and sponge filter. Unable to charge the battery. The machine is not fully inserted into the charging base.
Check if the machine is placed correctly. The power adapter is not properly connected to the power outlet or the charging base port. Ensure that the power adapter is properly connected to the power outlet and the charging base port. Sudden battery level drop during discharge. Perform three or more complete charge-discharge cycles on the product.High or low ambient temperature. Operate in a suitable environment.
Make sure the battery pack is completely charged before use.